Close

EN-5852 BLACK GALLON KIT

ELANTAS PDG CONAP EN-5852 Polyurethane Encapsulant Black 1 gal Kit

 
O

Descripción

ELANTAS PDG CONAP EN-5852 Polyurethane Resin System Black is a two component encapsulating system featuring UL Relative Temperature Index (RTI) of 130 °C, a low durometer of shore A 85 hardness, and UL 94 V-0 rating at 2.8 mm thickness. The combinations of these features enable excellent flame retardancy at lower material thickness and flexibility over a wide temperature range. The end result is reduced stress and a heat resistant environment for your electronic components. The 1 gal Kit consists of Part A in a 1 qt size, and Part B in a 1 gal size.

ELANTAS PDG CONAP EN-5852 Polyurethane Encapsulant Black 1 gal Kit

Número de Pieza EN-5852 BLACK GALLON KIT
Color Part A: Brown; Part B: Black
Componentes 2 part
Fuerza Dieléctrica 460 V/m
Elongación 180%
Tiempo de Curado Completo Firm Gel Time: 20 to 30min @ 25 °C; Full Cure: 7d @ 25 °C; Alternate Cure: 16h @ 80 °C
Dureza 85 A
Especificaciones Clave UL 94 V-0 @ 2.8 mm and UL RTI 130 °C
Proporción de Mezcla 1:4 by volume; 20:100 by weight
Gravedad Específica Part A: 1.21; Part B: 1.45
Resistencia a la Tracción 860 psi
Conductividad Térmica 0.60 W/mK
Viscosidad CP Part A: 460; Part B: 17,500; Mixed: 8,500
Resistencia del Volúmen 1.1 x 10^15 ohm-cm
ELANTAS PDG CONAP EN-5852 is used for potting and encapsulating electrical components, assemblies, circuit boards, and modules.